AC filtering and compensation applications
Its stated roles are filtering AC and addressing harmonics at high frequencies. Begin a selection enquiry with the intended connection and circuit requirement. For a compensation project, give the required reactive output together with the operating voltage and frequency, rather than an isolated capacity figure.
Specify whether the request concerns a single-phase or three-phase arrangement. Ask the proposal to identify how its capacitance, phase connection and rated current relate to the required application. A series description alone does not define a complete capacitor bank or promise a particular power-factor improvement.
Aluminium housing and terminal options
The aluminium shell contains metallized polypropylene film and oil filling. The product description includes an overpressure disconnector. This feature belongs to the component description; the equipment team should still specify the protection requirements for the overall assembly.
Connection options include fast-on terminals, an M10 screw option and M5 or M6 clamp options. Identify the intended conductor interface and request the corresponding outline. The preferred terminal should be reviewed with the electrical rating and available mounting space, rather than treated as an independent accessory choice.
Ratings and test conditions
The published voltage range is 300–690 VAC, with J (±5%) and K (±10%) capacitance tolerances. The specification lists maximum overvoltage at 1.1 times rated voltage and maximum overcurrent at 1.3 times rated current. Keep the required normal duty visible when reviewing these separate limits.
The between-terminal test is 2.15 times rated voltage for five seconds. The terminal-to-case test is 3,600 VAC for two seconds. Neither short-duration test is an additional continuous supply-voltage rating. The maximum altitude entry is 2,000 m; include installation altitude in the brief where it is relevant to the proposed equipment.
The listed reference standards are GB/T 12747.1-2017 and GB/T 12747.2-2017. If your specification calls for a particular compliance document, name it in the request and ask for its applicability to the proposed part.

Mechanical details for a proposed assembly
For initial comparison, prepare a drawing that shows the permitted body diameter and height, fixing arrangement and connection area. Mark any mounting features already fixed by the cabinet or panel. Ask for a complete outline for the selected rating before approving the installation.
If your purchasing description uses reactive power rather than capacitance, retain its voltage, frequency and phase basis on the drawing or specification sheet. Request those fields together in the quotation. This keeps the mechanical proposal associated with the electrical configuration being evaluated, without inferring a phase connection from an unlabelled catalogue value.
Request an MKP-AL quotation
See the AC filter capacitor range for related options. The MKP-AM series is a separate plastic-case, resin-filled family for output filtering; compare its construction and application requirements rather than assuming that the two families share an installation interface.
For MKP-AL, provide system voltage, frequency, phase arrangement, capacitance or reactive-output requirement, available harmonic information and local operating conditions. Add terminal preference, mounting drawing, sample quantity and production demand. Use the capacitor RFQ checklist to prepare the request and identify any required approval documents.
Frequently asked questions
Is MKP-AL resin-filled?
No. Its published construction is metallized polypropylene film in an aluminium shell with oil filling.
Which terminal options are described?
Fast-on terminals, an M10 screw option and M5 or M6 clamp options are listed. Confirm the interface for the proposed electrical configuration.
Can I request a three-phase configuration?
Single-phase and three-phase filtering are both described. State the phase and connection requirement explicitly when requesting a proposal.
Sources & technical reading
Product information is based on the SMILER catalogue. Confirm the specification for the selected configuration.

