Construction and applications
The dielectric is metallized polypropylene film; PPS is the case material. The resin filling carries a UL94 V-0 material description. Solar inverters and automotive DC-DC equipment are among the listed uses. The catalogue also identifies frequency converters and power supplies for industrial or high-end equipment. These are the intended application areas for the series, rather than approval of a particular converter design.
Compare this version with the MKP-LM DC-link capacitor when defining housing and environmental requirements. Both belong to our DC-link capacitor range. Include your preferred lead arrangement in the enquiry so the proposed electrical rating can be checked against the board footprint.
Humidity test: exposure and acceptance
The specified biased humidity exposure is 1,000 hours at 85°C and 85% relative humidity with rated voltage applied. The associated acceptance criteria include an absolute capacitance change of no more than 10% and insulation resistance of at least 50% of the initial limit. Keep the exposure and acceptance criteria together when comparing parts.
This is a qualification condition, not an immersion rating or a service-life prediction. For a project with its own environmental test procedure, send that procedure with the enquiry and request the applicable test documentation for the proposed configuration.
Voltage, temperature and electrical tests
The rated-voltage options at 85°C are 500, 600, 800, 900, 1,000, 1,100 and 1,200 VDC. Capacitance tolerances are J (±5%) and K (±10%). The specified case-temperature range is −40°C to +105°C. Between 85°C and 105°C, operating voltage is derated by 1.33% per degree Celsius relative to rated voltage at 85°C.
The terminal-to-terminal DC test is 1.5 times rated voltage for 10 seconds. The separate terminal-to-case test is 2,100 VAC at 50 Hz for 10 seconds. These short-duration tests are distinct from the continuous operating-voltage rating. The catalogue life statement is 50,000 hours at rated voltage and 85°C; it should stay attached to those conditions.

A practical starting point for the footprint
A published 500 VDC, 10-microfarad example has a body width of 32.0 mm, height of 24.5 mm and thickness of 15.0 mm, each with a ±1 mm tolerance. Its lead pitch is 27.5 ±0.5 mm and lead diameter is 0.8 ±0.05 mm. This example identifies one catalogue configuration, not the dimensions of the entire series.
The same row lists ESR of 7.5 milliohms at 10 kHz and RMS current of 6.5 A at 85°C and 10 kHz. For another capacitance or voltage, request the corresponding data row rather than carrying these current and dimension values across.
Request an MKP-LM THB proposal
Send the capacitance, tolerance, DC bus voltage, ripple-current requirement and operating temperature, together with the available mounting space. A drawing is especially useful if the lead pitch is already fixed. Add the required humidity qualification and identify any customer acceptance procedure.
Use our capacitor RFQ checklist to organize the enquiry, or contact SMILER with a drawing and sample quantity. Ask for an identified part configuration, its electrical data and its mechanical drawing in the same quotation.
Frequently asked questions
What does the THB version use for its case?
It uses a PPS plastic case with resin filling and metallized polypropylene dielectric film. PPS describes the housing, not the dielectric.
Is the full voltage range available at every capacitance?
The figures describe a series range. Request the exact voltage, capacitance and package combination needed for your design.
Does the humidity test establish waterproof performance?
No. The published test specifies temperature, humidity, voltage and duration; it does not provide an immersion or waterproof rating.
Sources & technical reading
Product information is based on the SMILER catalogue. Confirm the specification for the selected configuration.



