Choose the housing and terminal arrangement
The two housing descriptions are alternatives to specify during selection. Send the body envelope and required terminal geometry with the enquiry, especially where an existing assembly fixes the connection locations. The resin filling is described as UL94 V-0 material.
The series features include low self-inductance, low equivalent series resistance and resistance to current impact. These qualitative features make the family relevant to a power-electronics enquiry; the selected part still needs electrical data corresponding to the actual pulse and continuous-current requirements.
Voltage and capacitance requirements
The specification lists rated voltages at 85°C of 500, 600, 800, 900, 1,000, 1,100 and 1,400 VDC. Capacitance tolerance choices are J (±5%) and K (±10%). Send your required capacitance and ask for the compatible voltage and package configuration.
For an AC/DC filtering project, describe the waveform at the capacitor, including its DC component and varying component where applicable. The headline VDC range should not be used as an unrestricted AC voltage rating. Identify the intended circuit position so the technical proposal addresses the duty your design actually requires.
Humidity exposure and life conditions
The biased humidity specification is 1,000 hours at 60°C and 95% relative humidity with rated voltage applied. Its acceptance criteria include absolute capacitance change no greater than 5% and insulation resistance no lower than 50% of the initial limit. The exposure and limits should remain together in a qualification comparison.
The operating-life statement is 50,000 hours at rated voltage and 85°C. It does not specify the same life at every current waveform or installation temperature. For your project, include the required operating conditions and any customer test procedure in the request for part documentation.
The reference-standard field identifies GB/T 17702 and IEC 61071. Include any required compliance document in the enquiry and request the scope for the proposed configuration; a standards reference is not itself a certificate.

Electrical testing and the installation brief
A terminal-to-terminal DC test of 1.5 times rated voltage for 10 seconds is specified. This short-duration test should be distinguished from the normal operating-voltage requirement. Ask for the current configuration-specific specification when your approval process requires other insulation or environmental test details.
For an inverter welder, describe the relevant operating cycle and capacitor waveform. For a UPS, identify the capacitor position and the operating states that set its duty. These are different application briefs even when the requested family is the same. Attach measurements if available and label preliminary design estimates clearly.
Compare the right product family
The DC-link capacitor range places MKP-LS alongside other DC-link options. If the enquiry instead concerns IGBT surge absorption or a high-frequency resonant position, review the separate MKPH-LS snubber family against that requirement. Similar names do not define an identical component.
For an MKP-LS quotation, use the capacitor RFQ checklist and supply the electrical requirement, housing preference, drawing and quantities. Ask for the specific capacitance, rating, current characteristics and outline being proposed before arranging sample evaluation.
Frequently asked questions
Which housing options are listed?
The description lists a plastic shell or Mylar tape housing, resin filling and tinned copper terminals. Specify the preferred arrangement in the enquiry.
Can I select capacitance from a universal range here?
Request a part for your required capacitance and voltage. This page does not present a complete configuration table for automatic selection.
What humidity condition is specified?
The test is 1,000 hours at 60°C and 95% relative humidity with rated voltage, with capacitance-change and insulation-resistance acceptance criteria.
Sources & technical reading
Product information is based on the SMILER catalogue. Confirm the specification for the selected configuration.



